Removing A Memory Module; Figure 33: Locking The Memory Module; Figure 34: Disengaging The Locking Clips; Figure 35: Removing The Memory Module - VIA Technologies EPIA-M930 User Manual

Highly-integrated low-power platform with rich feature set and multimedia capabilities
Table of Contents

Advertisement

VIA EPIA-M930 User Manual
Step 2
Slide the SODIMM memory module into the side grooves and push the module into the slot until the locking
clasps snap into the closed position.

Figure 33: Locking the memory module

4.1.2 Removing a Memory Module

Step 1
Disengage the locking clips at both ends of the memory slot.

Figure 34: Disengaging the locking clips

Step 2
When the locking clips have been cleared, the SODIMM memory module will automatically pop up. Remove
the memory module.

Figure 35: Removing the memory module

26

Advertisement

Table of Contents
loading

This manual is also suitable for:

10gpd20g100a0

Table of Contents