Hardware Installation; Installing The Som-9X20 Module On The Somdb2 Carrier Board; Figure 7: Installing The Som-9X20 Module; Figure 8: Securing The Som-9X20 Module - VIA Technologies 10GWG21Q00020 User Manual

3. Hardware Installation

This chapter provides information about the hardware installation procedures.
3.1 Installing the SOM-9X20 Module on the SOMDB2
Carrier Board
Step 1
Align the notch on the SOM-9X20 module with the counterpart on the MXM 3.0 slot on the SOMDB2 carrier
board then insert the module at a 30° angle.

Figure 7: Installing the SOM-9X20 module

Step 2
Once the SOM-9X20 module has been fully inserted, push down the module until the standoff holes align with
the screw holes and then secure the module with the provided two screws.

Figure 8: Securing the SOM-9X20 module

3 0
SOM-9X20 User Manual
7