Sio Common Setting; Sio Configuration; Figure 47: Illustration Of The Sio Common Setting Screen; Figure 48: Illustration Of The Sio Configuration Screen - VIA Technologies EPIA-M930 User Manual

6.6.5 SIO Common Setting

This SIO (Super IO) Common Setting screen shows options to enable/disable the locking of Legacy Resources.
Advanced
SIO Common Setting
Wake system from S5

Figure 47: Illustration of the SIO Common Setting screen

6.6.6 SIO Configuration

The SIO (Super IO) Configuration screen shows a list of categories that can provide access to sub-screens. Sub-
screens can be selected by using the Up and Down arrows on the number pad.
Advanced
AMI SIO Driver Version :
Super IO Chip Logical Device(s) Configuration
[*Active*] Serial Port 1

[*Active*] Serial Port 2

[*Active*] Serial Port 3

[*Active*] Serial Port 4

WARNING: Logical Devices state on the left side of the
control, reflects the current Logical Device state. Changes
made during Setup Session will be shown after you restart
the system.

Figure 48: Illustration of the SIO Configuration screen

Aptio Setup - AMI
[Disabled]
Lock Legacy Resources
Disabled
Enabled
Version 2.22.1282 Copyright (C) 2022 AMI
Aptio Setup - AMI
A5.15.00
Version 2.22.1282 Copyright (C) 2022 AMI
VIA EPIA-M930 User Manual
Enables or Disables Lock of
Legacy Resources
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
View and Set Basic properties
of the SIO Logical device.
Like IO Base, IRQ Range, DMA
Channel and Device Mode.
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
36