Save & Exit; Figure 62: Illustration Of The Save & Exit Screen - VIA Technologies EPIA-M930 User Manual

6.10 Save & Exit
The Save & Exit Configuration screen has the following features:
Main Advanced Chipset
Save Options
Save Changes and Exit
Discard Changes and Exit
Save Changes and Reset
Discard Changes and Reset
Save Changes
Discard Changes
Default Options
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Launch EFI Shell from filesystem device
Figure 62: Illustration of the Save & Exit screen
Save Options
• Save Changes and Exit
− Save all changes to the BIOS and exit the BIOS Setup Utility. The "F4" hotkey can also be used to
trigger this command.
• Discard Changes and Exit
− Exit the BIOS Setup Utility without saving any changes. The "Esc" hotkey can also be used to
trigger this command.
• Save Changes and Reset
− Save all changes to the BIOS and reboot the system. The new system configuration parameters
will take effect.
• Discard Changes and Reset
− This command reverts all changes to the settings that were in place when the BIOS Setup Utility
was launched.
− The "F2" hotkey can also be used to trigger this command.
• Save Changes
− Save Changes done so far to any of the setup options.
• Discard Changes
− This command reverts all changes to the settings that were in place when the BIOS Setup Utility
was launched.
Aptio Setup - AMI
Security Boot Save & Exit
Version 2.22.1282 Copyright (C) 2022 AMI
VIA EPIA-M930 User Manual
Exit system setup after saving
the changes.
: Select Screen
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
47