Using The Web Browser Interface - Intermec IF30 User Manual

Chapter 1 — Getting Started

Using the Web Browser Interface

14
The IF30 is now ready to be connected to your network. See
"Connecting the IF30 to Your Network" on page 19.
After you have set the initial IP address, you can configure and
manage the IF30 remotely using the web browser interface. The
IF30 web browser interface has been tested using Internet
Explorer 6.0. Using other browsers may provide unpredictable
results.
To use the web browser interface, the IF30 must be connected to
your wired Ethernet.
If your session terminates abruptly or a new login screen appears,
someone else may have accessed the IF30. When using the web
browser interface, remember that your session terminates if you
do not use it for 15 minutes.
Note: If you access the Internet using a proxy server, add the IF30
IP address to your Exceptions list. The Exceptions list contains
the addresses that you do not want to use with a proxy server.
To use the IF30 web browser interface
1 Determine the IP address of the IF30. If a DHCP server
assigned the IP address, you need to get the IP address from
that server.
2 Start Internet Explorer.
3 In the Address field, enter the IP address, and press Enter.
The IF30 login screen appears.
IF30 Fixed Reader User's Manual