Rfid Applications And The If30; Creating Applications For The If30; Configuring Rfid Settings - Intermec IF30 User Manual

Fixed reader

Hide thumbs Also See for IF30:

Table of Contents

Chapter 3 — Creating and Using RFID Applications

RFID Applications and the IF30

An RFID application communicates with the IF30 through the

Data Collection Engine (DCE), and controls the reader by

issuing Basic Reader Interface (BRI) commands.

• For more information on the DCE, see "Configuring the

Data Collection Engine" on page 48.

• For more information on the BRI, see the Basic Reader

Interface Programmer's Reference Manual (P/N 937-000-xxx).

An RFID application can communicate directly with the IF30

DCE using the BRI protocol. For more information, see

"Configuring the Data Collection Engine" on page 48.

To develop RFID applications for the IF30, you will need to

write and test your RFID applications on a development

workstation (your desktop PC). The application can access the

IF30 via TCP on port 2189.

This section explains how you use the web browser interface to

change the settings for the IF30 RFID module. As you install and

test applications, you can configure the RFID settings for the best

system performance.

To change RFID module settings

1 From the menu, click RFID Module. The RFID Module

screen appears.

IF30 Fixed Reader User's Manual

Table of Contents