Chapter 4 — Managing, Upgrading, and Troubleshooting the IF30
56
To configure the IF30 to use Avalanche
1 From the menu, click Network Management. The Network
Management screen appears.
2 Configure Avalanche settings. For help, see the next table.
3 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
and then click Save Changes and Reboot. For help, see
"Saving Configuration Changes" on page 15.
Wavelink Avalanche Parameter Descriptions
Parameter
Allow Avalanche
Access
Avalanche Agent
Name
Description
Enables/disables the Avalanche client
management system.
Specifies the IP address or DNS name of the
Avalanche console.
Or, leave this field blank and the IF30 sends out
a broadcast request looking for any available
agent.
IF30 Fixed Reader User's Manual