Intermec IF30 User Manual page 15

IF30 Fixed Reader User's Manual
IF30 Front Panel Port Descriptions
Port Description
AC Power Used with an appropriate power cable, this port
connects the reader to an AC power source.
Ethernet 10BaseT/100BaseTx port. Used with an appropriate
cable, this port connects the reader to your Ethernet
network. The reader auto-negotiates with the device it
is communicating with so that the data rate is set at the
highest rate at which both devices can communicate.
Serial Used with an RS-232 null modem cable (P/N
059167), this port connects the reader to a terminal or
PC to perform configuration.
Control General purpose input/output (GPIO) port. This port
connects the reader to industrial controls such as relays
or indicators. The port includes optically-isolated
inputs, optically-isolated low voltage DC outputs, and
access to 12 VDC.
For more information on the IF30 GPIO interfaces,
see "About the GPIO Interfaces" on page 72..
For more information, see "Port Pin Assignments" on page 82.
Chapter 1 — Getting Started
5