Rejecting Expired Certificates - Intermec IF30 User Manual

Rejecting Expired Certificates

IF30 Fixed Reader User's Manual
By default, when you install a certificate the IF30 does not
validate the certificate dates against the date currently set in the
IF30 operating system. Follow the next procedure to set the IF30
to reject expired certificates.
To set the IF30 to reject expired certificates
1 From the menu, click Security. The Security screen appears.
2 Check the Rejected Expired Certificates check box.
3 Click Submit Changes to save your changes. To activate your
changes, from the menu bar click Save/Discard Changes,
and then click Save Changes and Reboot. For help, see
"Saving Configuration Changes" on page 15.
Chapter 2 — Configuring Network Settings
39