Intermec IF30 User Manual page 36

Chapter 2 — Configuring Network Settings
26
Ethernet Setting Descriptions
Parameter Description
DHCP Mode Sets the DHCP mode for the IF30:
• Choose Always Use DHCP if you want the
• Choose Use DHCP if IP Address is Zero if
• Choose Disable DHCP if you want to assign a
DHCP Name of the DHCP server. The IF30 accepts lease
Server Name offers from only this server.
DHCP User Class (Optional) User class for this DHCP server.
DHCP (Optional) Vendor class for this DHCP server.
Vendor Class
IP Address IP address of the IF30 Ethernet connection. The
IP address has the form x.x.x.x, where x is a
number from 0 to 255.
Set this value to 0.0.0.0 if you set the DHCP
Mode to Use DHCP if IP Address is Zero.
Set this value to a static IP address for the Ethernet
connection if you disabled DHCP.
IP Subnet Mask Subnet mask for this network. The subnet mask
has the form x.x.x.x, where x is a number from 0 to
255.
IP Router IP address of the router. The IP address has the
(Gateway) form x.x.x.x, where x is the number from 0 to 255.
Link Speed Choose the speed and duplex mode you want the
IF30 to use when it communicates with the
Ethernet network.
If you want the IF30 to auto-negotiate this field,
choose Auto Select. Auto Select should work for
most networks.
IF30 to get its IP address from a DHCP server.
you want the IF30 to use DHCP whenever its
IP address is set to 0.0.0.0. If you choose this
option, make sure the IP address is set to
0.0.0.0.
static IP address to the IF30.
IF30 Fixed Reader User's Manual