Changing The Default Login - Intermec IF30 User Manual

Fixed reader

Hide thumbs Also See for IF30:

Table of Contents

IF30 Fixed Reader User's Manual

5 For each password server, enter the IP address or the DNS

name, enter the shared secret key and port number.

Note: If you enter more than one password server, the other

password servers act as backup servers. The IF30 uses the first

password server (starting with Server 1) whose IP address/

DNS name and secret key are the same as the one in the list.

6 Configure the password server database. For help, see the

documentation that came with your server.

Changing the Default Login

If you are not using a password server to authorize user logins,

Intermec recommends that you change the default user name and

password and create a read-only password.

To set up logins

1 From the main menu, click Security > Passwords. The

Passwords screen appears.

2 Clear the Use RADIUS for Login Authorization check box.

3 Click Submit Changes to save your changes.

4 Configure the parameters. For help, see the next table.

5 Click Submit Changes to save your changes. To activate your

changes, from the menu bar click Save/Discard Changes,

and then click Save Changes and Reboot.

For help, see "Saving Configuration Changes" on page 15.

Chapter 2 — Configuring Network Settings

Table of Contents