Managing The If30; Using Intermec Smartsystems Foundation; Configuring The If30 With Intermec Settings - Intermec IF30 User Manual

Chapter 4 — Managing, Upgrading, and Troubleshooting the IF30

Managing the IF30

Using Intermec SmartSystems Foundation

Configuring the IF30 with Intermec Settings

54
There are several methods you can use to manage the IF30. You
can use:
• a web browser. For help, see "Using the Web Browser
Interface" on page 14. This manual assumes that you are
using this method for all procedures.
• Intermec SmartSystems Foundation. For help, see the next
section.
• the Wavelink Avalanche client management system. For help,
see "Using Wavelink Avalanche" on page 55.
• an SNMP management station. For help, see "Enabling
Simple Network Management Protocol (SNMP)" on
page 57.
The IF30 ships with a SmartSystems Client, which means you
can manage it from a central host PC using Intermec's
SmartSystems Foundation. The SmartSystems Console displays
all SmartSystems-enabled devices in your network.
SmartSystems Foundation is available for free from the Intermec
web site. To download SmartSystems Foundation, go to
www.intermec.com/SmartSystems. For information on using the
SmartSystems Console, in the Console choose SmartSystems >
Help.
• In the console, right-click an IF30 and choose Intermec
Settings from the menu. The Intermec Settings browser
appears.
For help with using Intermec Settings, in the Intermec Settings
browser choose Help > Online Manual.
IF30 Fixed Reader User's Manual