Intermec IF30 User Manual page 46

Chapter 2 — Configuring Network Settings
36
Password Parameter Descriptions
Parameter
Use RADIUS for
Login Authorization
User Name
Password
Read Only Password
Allow Service
Password
Descriptions
Determines if you are using a password server
to authenticate logins to this IF30. Uncheck
this check box if you are not using a password
server.
Enter the user name you need to use to log in
to this IF30. The user name can be from 0 to
32 characters long.
If you leave the user name and password fields
blank, a user will not need to log in to the
IF30.
Enter the password you use to log in to this
IF30. This password gives you read and write
access to the IF30 configuration. The
password can be from 0 to 32 characters long.
If you leave the user name and password fields
blank, a user will not need to log in to the
IF30.
Enter the password you need to use to log in
to this IF30. This password gives the user
read-only access to the IF30. This user can
view the configuration and execute diagnostics
but cannot perform any tasks that affect IF30
operation, such as changing configuration
options or downloading software.
To disable this password, delete it.
If the user enters a login that does not match
either the user name and password or the read
only password, this setting (enabled by
default) allows the login to be checked against
the service password. Intermec Product
Support may use this service password if they
need to troubleshoot this IF30.
If this feature violates your security guidelines,
you may disable the service password by
unchecking the check box. If you disable the
service password and forget your normal
password, you will need to contact Product
Support for instructions on resetting all
passwords to default values.
IF30 Fixed Reader User's Manual