Figure 2-3 Vehicle Battery Cable Ends - Intermec 4820F User Manual

SECTION 2
Crimping the Cable Ends
Do the following to attach a terminal ring and a preas-
sembled in-line fuse link to the vehicle battery cable.
" NOTE:
You may have to shorten and restrip the red wire when attaching the
fuse link assembly.
1. Strip the black wire.
2. Crimp the 3/8" terminal ring (1) onto the black wire.
3. Locate the fuse link (2) and attach it to the red wire
4. Then, strip 1/4" (6 mm) of insulation off the red wire.
5. Securely crimp the fuse link splice (3) onto the red
Black (or Brown) Wire
4
Red Wire
(shorten the red wire if desired).
wire.
Crimp
Here
3
1. 3/8" terminal ring
2. Fuse link assembly
3. Fuse link splice
4. Vehicle battery cable
Figure 2-3
Vehicle Battery Cable Ends
1
D Strip wire
D Install terminal ring
2
4820 Printer User's Guide
Installation
2-7