Cable Installation; Figure 2-1 Two-Cable Installation Solution - Intermec 4820F User Manual

Installation

Cable Installation

There are at least two ways to do the installation: direct-
to-the-battery or to the fuse block. The direct-to-battery
method is recommended. Follow these guidelines when
installing the power cable.
Direct-to-Battery
8
7
1. Black (or brown) wire
2. 3/8" terminal ring
3. Fuse link assembly
4. Vehicle battery cable - - 8, 16, or 22 feet (2.4, 4.9, or 6.7 meters)
5. Filter
6. Chassis ground
7. Fixed mount printer
8. Printer power cable - - (4 feet or 1.2 meters - - goes to printer)
2-4 4820 Printer User's Guide
Figure 2-1
Two-Cable Installation Solution
SECTION 2
1 2
4
5
6
3