Installing The Battery - Intermec UVE 10 PB21 User Manual

•
•
•
•
Use Intermec Model AB27 battery only. Use of another battery
may present a risk of fire or explosion.
The Model AB27 battery may present a fire or chemical burn
hazard if mistreated. Do not disassemble, heat above 100 °C
(212 °F), or incinerate. Dispose of used batteries promptly. Keep
away from children.

Installing the Battery

Make sure you fully charge the battery before you use your printer.
You can charge the battery before or after you install them into the
printer.
To install the battery
2 Insert the battery with the tab facing away from the front control
PB21 and PB31 Mobile Receipt Printer User Guide
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
Printer configuration, including network connection settings
Type of media loaded in the printer
Amount of data printed for each label
Threshold at which you configure the low battery warning
1 Lay the printer upside down on a flat surface.
panel.
V10 CONSUMIBLES S.L.
11