Intermec 4820F User Manual page 30

Installation
Connecting to Top-Mount Battery Terminals
Do the following to attach the vehicle battery cable to a top-
mount battery terminal:
1. Disconnect the negative battery terminal cable.
2. Remove the bolts from the battery terminal cable and
3. Tighten these nuts securely.
4. Slip a 3/8" washer (6) onto the extended end of each
5. Slide the positive (fuse link with red wire (4)) terminal
6. Slip a second 3/8" washer (6) onto the bolt (5).
7. Tightly thread a second 3/8" nut (1) onto that bolt (5).
" NOTE:
Repeat steps 4- -7 for the negative battery cable wire (black or
brown), connecting the wire to the negative battery computer.
8. Reconnect the negative battery terminal cable.
2-10 4820 Printer User's Guide
replace these bolts with 3/8"
nuts (1) furnished in the installation kit.
bolt.
ring from the vehicle battery cable onto the positive
(+) battery bolt (5),
SECTION 2
1-1/2" bolts (5) and
x