SECTION 4
Installing New Ribbon Cartridge
" NOTE:
Make sure that the visible portion of the ribbon is not frayed or torn
before you install the new ribbon cartridge.
Do the following to install the new ribbon cartridge:
1. Turn the ribbon advance knob (in the direction of the
2. With the ribbon cartridge locking tab squeezed
3. Lower the tab side of the cartridge until it clicks into
4. Release the tab and press down on the arrow to fully
5. Turn the ribbon advance knob (follow raised arrows)
1
raised arrows) to remove any slack in the ribbon.
against the cartridge, lower the cartridge over the
print head.
position.
seat the ribbon cartridge (tab clicks outward).
to align the ribbon in the front of the print head.
2
3
4
1. Ribbon
2. Locking tab
3. Advance knob
4. Tightens ribbon
Figure 4-5
Installing Ribbon Cartridge
Maintenance
4820 Printer User's Guide
4-7