Connectors - Intermec 4820F User Manual

Introduction

Connectors

Each printer has a dc power jack that connects the printer
to a power source, such as the vehicle battery or an exter-
nal power supply.
Each printer communicates with a hand-held computer
through the 25-pin data communications connector (wall
mount printer) or 15-pin connector socket (in terminal hold-
er, remote terminal holder, or vehicle dock).
"
"
"
1-4 4820 Printer User's Guide
Fixed Mount Printer
The dc power connector is on the bottom rear of the
printer behind the printer terminal holder.
The data communication connector (15-pin socket), is
in either the printer terminal holder or a separate ve-
hicle dock.
Portable Printer
The dc power connector is found on the side of the
printer, beneath the printer terminal holder.
The data communications connector (15-pin socket) is
either in the printer terminal holder or a separate ve-
hicle dock.
Wall Mount Printer
The dc power connector is on the bottom left of the
printer.
The data communications connector (25-pin socket) is
on the bottom right of the printer.
SECTION 1