General Cleaning; Cleaning The Outside - Intermec 4820F User Manual

Maintenance

General Cleaning

B CAUTION:
Do not use glass cleaners with ammonia. Permanent damage
to the printer cover will occur if such glass cleaners are used.
Do not use abrasives or solvents (or any product containing
these substances) to clean any part of the unit. Permanent
damage to the printer will occur if such substances are used.
Never use ketonic solvents (acetone or ketone) or aromatic
solvents (toluene or xylene) to clean any part of the printer.
Doing this can damage the printer.
" NOTE:
MICRO-CLEAN II is the only cleaner recommended for this purpose.
Other cleaners can damage the case.
GUIDE SHAFT CLEANER is recommended for cleaning your 80-col-
umn printer guide shafts. Cleaning the printer guide shaft reduces
the number of head jams caused by dirt and buildup.
Both cleaners can be purchased through Inside Sales at
1-800-255-6292.
Periodic cleaning helps maintain the appearance and reli-
ability of the printer. When cleaning the printer, inspect
both the outside and the inside for obvious signs of damage,
wear, or impending failure.

Cleaning the Outside

Do not pour liquid cleaners directly on the printer case.
Instead, dampen a soft, lint-free cloth with a quality clean-
er and clean the exterior surfaces with this cloth. Do not
use solvent solutions. Inspect the dc power jack, all cables,
and the remote terminal holder or vehicle dock for damage.
4-2 4820 Printer User's Guide
SECTION 4