Figure 2-14 Mounting The Wall Mount Printer - Intermec 4820F User Manual

Installation
Mounting the Printer
The wall mount printer sits on the bottom lip of the mount-
ing plate. The top of the printer is held to the mounting
plate via a printer tie-down bracket (5" x 4") and knob.
1. Using the two horizontal slots on the printer bottom,
2. Set the tie-down bracket into the horizontal slot at the
1
2-20 4820 Printer User's Guide
push the printer onto the two bottom lips on the
mounting plate. Hold the printer against the mount-
ing plate.
top of the printer, then align and turn the black knob
clockwise onto the knob screw to tighten the bracket
onto the mounting plate.
2
3
4
5
1. Knob screw on mounting plate assembly
2. Knob
3. Printer tie-down bracket
4. Printer
5. Bottom lips on mounting plate assembly
6. Bottom of printer
Figure 2-14
Mounting the Wall Mount Printer
SECTION 2
6