Figure 3-6 Pressing Down With Pliers; Figure 3-7 Rotating Spacer - Intermec 4820F User Manual

Operation
From a Shallow Paper Tray
To remove the battery spacer from a printer with a shallow
paper tray, do the following:
1. Grasp the spacer firmly with pliers and press down
Rotate in this direction
2. Rotate the spacer until it is free from the battery re-
3. Lift the spacer out from the printer cavity.
3-6 4820 Printer User's Guide
firmly on the spacer as you rotate it. (Rotate the
spacer clockwise as shown.)
Figure 3-6
Pressing Down with Pliers
tainer.
Rotate in this
direction
Figure 3-7
Rotating Spacer
SECTION 3
Lift