Installing The Battery; Charging The Batteries - Intermec PB50 User Manual

Chapter 1 — Using the Mobile Printer

Installing the Battery

Charging the Batteries

8
Make sure you fully charge the battery before you use your printer.
You can charge the battery before or after you install them into the
printer.
To install the battery
1 Lay the printer upside down on a flat surface.
2 Insert the battery with the tab facing away from the front control
panel.
3 Insert the edge of the battery under the lip of the printer and then
push down until you hear the battery latch click.
There are two ways to charge the printer battery:
PB50 and PB51 Mobile Printer User's Guide