Figure 2-13 Attach Paper Tray To Mounting Plate - Intermec 4820F User Manual

SECTION 2
Attaching Paper Tray to Mounting Plate
Use two bolts to attach the paper tray ensemble to the cen-
ter, bottom lip of the mounting plate.
1. Position the center lip on the paper tray bracket over
2. Hold the paper tray ensemble in place and insert two
3
the center, bottom lip on the mounting plate. The two
holes in the paper tray bracket should align with the
holes in the center, bottom lip of the mounting plate.
1/4" bolts in the holes, through the paper tray bracket.
Use a 7/16" wrench to tighten the bolts.
1
1. Center lip on paper tray
2. Compact paper tray
3. Center, bottom lip on mounting plate
Figure 2-13
Attach Paper Tray to Mounting Plate
Installation
2
4820 Printer User's Guide 2-19