Table of Contents
Advertisement
Direct-to-Battery Cable Installation
6
We recommend you connect printers directly to the battery based on the
following criteria:
S The vehicle battery acts as an electrical filter and regulator.
S If there is any damage to the printer dc power cable, the cable is easily
replaced.
1
1 DC power cable — 4 feet or 1.2 meters (goes to printer)
2 Black (or brown) wire
3 3/8" terminal ring
4 Fuse link assembly with 15-amp fuse
5 Splice
6 Vehicle battery cable — 8, 16, or 22 feet (2.4, 4.9, or 6.7 meters
7 Chassis ground
2
6
7
PK80 Series 80-Column Printer Installation Instructions
3
4
5
Advertisement
Table of Contents
