Inserting Computer In Terminal Holder; Inserting 4000 Series Or 62Xx Computer - Intermec 4820F User Manual

SECTION 3

Inserting Computer in Terminal Holder

" NOTE:
When removing the computer, do not press the computer keys
against the terminal slide retainer. Always store the computer in the
terminal holder.
The fixed mount or portable printers have terminal holder
options for the 4000 Series, 61XX, or 62XX Computers.

Inserting 4000 Series or 62XX Computer

1. Insert the bottom of the computer into the terminal
2. Use the computer to push the terminal slide retainer
3. Lower the connector end of the computer into the ter-
4. Slide the computer to fully seat it in the printer dock-
3
Inserting 4000 Series or 62XX Computer into Terminal Holder
slide retainer.
in the direction (shown in figure a).
minal holder.
ing connector (figure b).
(a)
1
2
1. Bottom (or battery) end of computer
2. Terminal slide retainer
3. 15-pin connector end in printer
Figure 3-14
Operation
(b)
4820 Printer User's Guide 3-15