Transportation; Guaranty; Liability; Ce Conformity - Otto Bock C-Leg Prosthetic System Instructions For Use Manual

Table of Contents

3.4 Transportation

Always use the X‑3C100 Shipping Case when transporting your electronic joint system and the Service Joint.

Ottobock offers an extensive guaranty service on the basis of the current C-Leg guaranty concept (see 646D241=*

C-Leg Service Card). Please comply with the prescribed service intervals (see Section 3.1 "Service Intervals"). For

your own interest, we also recommend obtaining a confirmation from your patients for the provision of instructions

and the handing over of the device.

The device is only to be used under the specified conditions and for the intended purposes. The device must be

maintained according to the Instructions for Use. The device must only be operated with tested modular compo-

nents in accordance with the Ottobock Mobility System. The manufacturer is not liable for damage caused by

component combinations that were not authorized by the manufacturer.

The electronic 3C88-2/3C98-2 C-Leg Prosthesis System meets the requirements of the 93/42/EEC guidelines for

medical devices. This product has been classified as a class I device according to the classification criteria outlined

in appendix IX of the guidelines. The declaration of conformity was therefore created by Ottobock with sole respon-

sibility according to appendix VII of the guidelines.

The electronic 3C88-2/3C98-2 C-Leg Prosthesis System also meets the requirements of the 1999/5/EC guidelines

for radio equipment and telecommunications terminal equipment. Conformity assessment was carried out by Ot-

tobock according to appendix IV of the guidelines. A copy of the declaration of conformity can be requested from

the manufacturer (see back side).

26 Ottobock

C‑Leg Service

USA:

800‑328‑4058

Canada:

800‑665‑3327

Great Britain:

1784 744 900

C-Leg Prosthetic System

Table of Contents