5.7 SETUP OF SERIES
The function is used to create a series of exercises for the patient. After selecting
"SERIES EDITOR" and choosing the type of series (Concentric, Eccentric, PM), the
following
screen will appear for create a new series.
2
1
5
4
3
To create a new series, press "NEW", select the limb, the type of motion and its values.
Confirm by pressing "ADD" (1) and repeat the operation until the desired series is
created.
To delete an exercise from the series, select the exercise to be deleted, press "DELETE"
(2) and confirm as shown in the following image.
Easytech s.r.l. – Genu Iso/Plus User's Manual
rev. C
Pag. 78 di 97