The zero line moves to the lowest section of the chart and the two curves are
shown as absolute values. The dark curve refers to the extension values, while the
lighter one shows the flexion one.
This simplifies the identification of the difference between flexor and extensor
muscles.
By clicking
charts and compare the torque values of one limb with those of the other one.
Continuous curves refer to the limb being examined while the dotted ones refer to
the contralateral limb.
The printer icon
shows the data along with the charts selected on the screen.
The second shows all the differences (ratios and percentages) between:
•
Extension and flexion of the limb being examined
•
Extension and flexion of the contralateral limb
•
Extension of the limb being examined and the contralateral limb
•
Flexion of the limb involved in the exercise
Easytech s.r.l. – Genu Iso/Plus User's Manual
in the lower left side, it is possible to display the two overlapped
in the lower right enables to print the two-page report: the first
rev. C
Pag. 75 di 97