Adjustments For Dynamic Exercises - easytech Isokinetic Genu Iso User Manual

Attach the thigh straps by routing them under the
hooks in the handle support rings. The four
attachment-point harness is correctly positioned
when the clasp is located immediately above the
pubis. Adjust the harness by acting on the buckles
that adjust the length of the lap and shoulder
(torso) straps.
It is recommended that a towel be placed on the
seat to guarantee hygiene and comfort and to limit
wear and tear of the seat upholstery.

4.3.2 Adjustments for dynamic exercises

It is possible to perform the following independent adjustments:
▪ Angular velocity of extensors: between 40°/s and 400°/s in 1°/s steps;
▪ Angular velocity of flexors: between 40°/s and 400°/s in 1°/s steps;
▪ Angular velocity of eccentric extension: between 20°/sec and 200°/sec at 1°/sec steps;
GenuPLUS model
▪ Eccentric bending angular velocity: between 20°/sec and 200°/sec at 1°/sec steps;
GenuPLUS model
▪ Angular velocity of Passive Motion: Between 5°/sec and 20°/sec at 1 sec. Steps;
GenuPLUS model
▪ Range Of Motion (ROM) of extensors: between 0° and 105° in 15° steps;
▪ ROM of flexors: between 0° and 105° in 15° steps;
For dynamic exercises, it is possible to limit the movement range for the exercises by
tightening the knobs in the position that corresponds to the desired movement range.
Easytech s.r.l. – Genu Iso/Plus User's Manual
rev. C

Pag. 23 di 97