Table of Contents
Advertisement
Extension/flexion – Choose the type of movement.
Height of tibial support – Set the desired value by moving the cursor until the desired
number displays and move the mouse to the right or left in increments of units for a
fine adjustment.
In this type of exercise, it is possible to set only the LIMITS, while the COMPENSATION
is not present.
5.3.4.2 Setting the limits
1 – ENABLE/DISABLE TORQUE TARGET – If activated, a limit will be indicated on the
graph during the exercise. This limit can be used by the patient as a target to be
achieved; its default is the maximum value of the previous exercise.
5.3.4.3 Exercise in progress and review of graphics
Once all the settings have been completed, press the arrow at the bottom right to
access the page relating to the exercise.
Press START, wait for the device to issue an acoustic/visual signal, then start the
exercise.
Easytech s.r.l. – Genu Iso/Plus User's Manual
1
rev. C
Pag. 41 di 97
Advertisement
Table of Contents
