Table of Contents
Advertisement
The PC must be used exclusively for the operation on Genu device. Any other use of
the PC than that indicated in this manual involves the risk of degradation or loss of
the essential safety features of the device and the immediate interruption of the
guarantee.
3.1.1 Frame and patient accommodation
➢ Frame entirely made from electro-welded steel.
➢ Electroplated visible parts (nickel-cadmium plating and plastics lining).
➢ ABS fairings.
➢ Chair and fastening attachments from high density polyurethane foam (90
Kg/m3) with neoprene foam inserts in the most stressed areas.
➢ Lining of chair and straps from embossed imitation leather.
➢ Straps from high-strength nylon woven fabric.
➢ Seat frame is designed to support patient up to 120 kg.
➢ Continuous adjustment of:
➢ Discrete adjustment of:
3.1.2 Oleodynamic section - Isometry selector
➢ Isokinetic brake with cam actuator, velocity adjustment (in direct relation to
flow rate) obtained through a proportional electrically operated valve with
feedback control.
➢ The sensing instruments are incorporated in the actuator:
• torque transmitter: strain-gauge torquemeter;
• position transmitter: optical encoder.
➢ The oleo-dynamic isokinetic brake can be locked at fixed angles using the
special mechanical selector for isometric measurements and exercises.
➢ The control level of the selector is situated on the front of the device.
Easytech s.r.l. – Genu Iso/Plus User's Manual
- seat length;
- backrest tilt;
- lever length (with adjustment ruler).
- Range Of Motion (0° - 105°) pitch 15
- Angles for isometric exercise (0° - 90°), in step of
15°
rev. C
Pag. 14 di 97
Advertisement
Table of Contents
