Table of Contents
Advertisement
**** The braking distance can be correspondingly longer due to user weight, luggage and condition of the tyres,
and due to weather and surface conditions.
Driving distance range (on level surfaces)*
All battery types
* The specified driving distance range was determined under defined conditions according to ISO 7176-4. In prac
tice, the driving distance range can be reduced by up to 50 per cent. See the section "Driving distance range".
Battery (depending on country version)
AGM batteries
AGM batteries
Gel batteries
Gel batteries
Electrical circuit*
IP protection rating (according to DIN EN
60529)
Operating voltage
Motor power
Lighting
LED front light
LED rear light
Fuse
Battery charger
* The product meets all requirements under ISO 7176-14.
Battery charger (not supplied by Ottobock)*
Required minimum specifications
* For further details, see the instructions for use supplied with the battery charger.
Control device
Model
Max. output current per motor
Force for operating the joystick on the
standard control panel
Allowable environmental conditions
Operating temperature
Transport and storage temperature
Relative humidity
Corrosion protection
Corrosion protection
490E163=*
Approx. 25 km (16 miles)
2 x 12 V; 29.75 Ah (C5)/35 Ah (C20); maintenance-free
2 x 12 V; 30 Ah (C5)/36.5 Ah (C20); maintenance-free
2 x 12 V; 27 Ah (C5)/35 Ah (C20); maintenance-free
2 x 12 V; 28.75 Ah (C5)/35 Ah (C20); maintenance-free
IP44
24 V DC
See nameplate on motor for precise information: 160 watts/200 watts
(depending on country version)
24 V, maintenance-free
24 V, maintenance-free
50 A fuse cable (nVR2)
5 A; usually supplied by Ottobock; for details, see the included bat
tery charger instructions for use
Minimum charging current: 5 A; maximum charging current: 10 A
Input voltage: 100–240 V
Isolation (class 2) according to IEC 60335-2-29; protection rating:
IP21
The battery charger fulfils the normative requirements of EN 12184.
This also includes the requirements according to ISO 7176-14 (bat
tery charger with reverse polarity protection; battery charger charges
batteries to at least 80 per cent within 8 hours; battery charger
includes information regarding nominal capacity and the possibility of
charging overnight; battery charger indicates that the battery is prop
erly connected)
The device fulfils the normative requirements of ISO 7176-21 and
ISO 7176-25.
nVR2
40 A (continuous current); 50 A (peak current)
1.6 N
-15 °C to +40 °C (+5 °F to +104 °F)
-15 °C to +40 °C (+5 °F to +104 °F)
45% to 85%; non-condensing
Cathodic dip coating / powder coating
Technical data
47
Advertisement
Table of Contents
