Seat Insert, Small - Otto Bock Kimba Instructions For Use Manual

→ Guide the lower 3 hook-and-loop straps around the back support pad and fasten them together (see
fig. 76, item 1).
→ Thread the vertical hook-and-loop straps through the back support pad (see fig. 76, item 2).
5) Attach the back support pad to the seating unit:
→ Pull the top of the back support pad over the back support.
→ Guide the vertical hook-and-loop straps backwards over or through the back support (see fig. 77, item 1).
→ Guide the upper horizontal hook-and-loop strap around the back support and fasten it (see fig. 77, item 2).
The vertical hook-and-loop straps must be held in place by the horizontal hook-and-loop strap (see fig. 77,
item 3).
6) Guide the back support pad underneath the back support and secure it at the eyelets with the twist lock (see
page 44).
74
76
Removing and cleaning the incontinence cover
1) Detach the seat pad and the back support pad from the seating unit (see page 44).
2) Detach the incontinence cover from the seat pad and set it aside.
3) Remove the incontinence cover from the back support pad. To do so, open all the hook-and-loop straps and
detach the incontinence cover from the back support pad.
4) Wash the incontinence cover in accordance with the washing symbols on the care label.
INFORMATION: Before washing, close the straps so the entire hook-and-loop surface of the straps is
covered.

7.2.15 Seat insert, small

The seat insert provides very small children with better support in the seating unit (see fig. 78). The seat insert can
be removed for washing. Before washing the insert, close the attachment straps.
Kimba
75
77
3
1
3
2
Use
39