Adjustable Arm Supports; Tray - Otto Bock Kimba Instructions For Use Manual

7.2.6.2 Adjustable arm supports

Adjusting the adjustable arm supports
a) Adjusting the height
1) Lift the padding underneath the arm support to the side (see fig. 58, item 1).
2) Loosen the mounting screws (see fig. 58, item 2).
3) Adjust the height of the arm support (see fig. 58, item 3).
4) Tighten the mounting screws (see fig. 58, item 2).
b) Adjusting the depth
1) Remove the arm support covers.
2) Loosen the wing nuts (see fig. 59, item 1).
3) Adjust the arm support horizontally (see fig. 59, item 2).
4) Tighten the wing nuts and attach the arm support pad.
58

7.2.7 Tray

WARNING
Inflammable product
Burns due to user error
► The product is flame retardant. Nevertheless, the possibility that it may catch fire cannot be entirely excluded
in case of exposure to an ignition source. Therefore, the utmost caution must be exercised in the vicinity of an
open flame.
► Keep away from all ignition sources, especially lit cigarettes.
CAUTION
Improper adjustment
Crushing or pinching due to adjustments which are too tight
► Do not pinch the user when sliding in the product.
CAUTION
Driving with objects on the tray top
Injuries due to unsecured objects
► Remove all objects from the tray top prior to travelling.
CAUTION
Improper lifting by attendants
Tipping over, user falls due to lifting by removable components
► The product must not be lifted by the tray.
Kimba
59
Use
33