Armrests; Standard Arm Supports - Otto Bock Kimba Instructions For Use Manual

Hide thumbs Also See for Kimba:

Table of Contents

Use

Removing the grabrail

1) Push in the release buttons to release the tripod springs (see fig. 56, item 1).

2) Pull the grabrail up and out (see fig. 56, item 2).

Attaching the grabrail

1) Insert the grabrail into the guides.

2) Press in the first release button and push the grabrail down slightly. Then repeat this process on the opposite

side of the grabrail (see fig. 55).

3) Press the grabrail down until the tripod springs engage behind the release buttons (see fig. 56, item 2).

7.2.6 Armrests

CAUTION

Improper lifting by attendants

User tipping over or falling due to lifting by removable components

► The arm supports must not be used to lift the product.

INFORMATION

Note that only one of the following options may be used at one time as they all attach to the same adapter on the

seat:

- Grab rail

- Arm supports, standard

- Tray

For certain indications, the seating unit can be equipped with arm supports on which the arms can be rested.

Detaching and attaching the standard arm supports

The standard arm supports (see fig. 57) are attached and detached in the same way as the grabrail (see page 31).

Kimba

Table of Contents