Hook-And-Loop Foot Straps; Padding; Grab Rail - Otto Bock Kimba Instructions For Use Manual

Hide thumbs Also See for Kimba:

Table of Contents

7.2.3.5 Hook-and-loop foot straps

The seating unit can be equipped with hook-and-loop foot straps that secure the feet firmly on the leg support for

certain indications (see fig. 54).

Using the hook-and-loop foot straps

1) Undo the hook-and-loop closure.

2) Place the foot on the leg support.

3) Pass the strap tightly around the shoe and fasten the hook-and-loop closure.

Information on taking off and putting on the padding and covers is provided in the section "Care" (see page 44;

see page 45).

CAUTION

Improper lifting by attendants

User tipping over or falling due to lifting by removable components

► The grab rail must not be used to lift the product.

INFORMATION

Note that only one of the following options may be used at one time as they all attach to the same adapter on the

seat:

- Grab rail

- Arm supports, standard

- Tray

For certain indications, the seating unit can be equipped with a grab rail that prevents the user from falling for

wards out of the seat.

The grab rail can be removed to make getting into the product easier.

Kimba

Use

Table of Contents