Integrated Head Support With Slight Lateral Support; Head Support, Individually Adjustable - Otto Bock Kimba Instructions For Use Manual

7.2.1.2 Integrated head support with slight lateral support

Qualified personnel can reduce the width of the head area by gluing foam pads (see fig. 21, item 1) into the head
support's side pads (see fig. 20).
Up to three pads with a thickness of 10 mm each can be glued in on each side. In total, qualified personnel can
reduce the width by 60 mm (30 mm each side). The option has been preset by qualified personnel.
19
21

7.2.1.3 Head support, individually adjustable

WARNING
Incorrect use of the mounting kit without head support
Severe injury to the user in the cervical spine area
► Only use the mounting kit in connection with a head support at all times.
The following individually adjustable head supports are available for the seating unit:
• Head support, concave (see fig. 22)
• Head support, three-part, angle-adjustable (see fig. 23)
The head supports are supplied with a head support holder and a short back support.
The position of the head supports can be adjusted (see fig. 22, see fig. 23) to the individual user. The option has
been preset by qualified personnel.
Kimba
20
Use
19