Otto Bock Kimba Instructions For Use Manual page 40

Use
78
Attaching the seat insert
1) Place the seat insert within reach. Undo all the attachment straps.
2) Place the seat insert on the seat pad and back support pad (see fig. 79).
3) Pass the attachment straps through the back support (see fig. 80):
→ Pass the upper strap 2x through the upper horizontal slots in the back support (see fig. 81, see fig. 80,
item 1). Close the belt buckle.
→ Pass the middle strap 2x through the upper vertical slots in the back support (see fig. 80, item 2). Close the
belt buckle.
→ Pass the lower strap 2x through the inner, round holes on the (seat) frame (see fig. 82, item 1; see fig. 80,
item 3). Close the belt buckle.
Removing and cleaning the seat insert
1) Open the belt buckles on the seat insert attachment straps.
2) Remove the seat insert from the seat base.
3) Close the belt buckles on the seat insert.
4) Wash the seat insert according to the washing symbols on the care label.
79
81
40
80
82
Kimba