Adjusting The Push Bar With Ratchet Joints (Option); Side Panels (Option) - Otto Bock Dino 3 Instructions For Use Manual

41

7.7.2 Adjusting the push bar with ratchet joints (option)

The height and angle of the push bar can be adjusted in order to make pushing easier for the attendant:
Adjusting the height of the push bar with ratchet joints
1) Release the clamping levers on the right/left sides of the back support tubes (see fig. 42, item 1).
2) Adjust the height of the push bar.
INFORMATION: The maximum adjustment range is 150 mm.
3) Firmly tighten the clamping levers on the right/left sides of the back support tubes (see fig. 42, item 1).
Adjusting the angle of the push bar with ratchet joints
1) Release the clamping levers on the right/left sides of the ratchet joints (see fig. 42, item 2).
2) Move the push bar to the desired angle.
3) Firmly tighten the clamping levers on the right/left sides of the ratchet joints (see fig. 42, item 2).
42

7.8 Side panels (option)

CAUTION
Pinching at the side panels
Pinching, crushing due to lack of caution in danger areas
► Pay attention not to pinch parts of your body between the side panel or frame parts.
The product can be equipped with optional side panels:
• Side panel with arm support, adjustable in height and depth
• Side panel with clothing guard for 22" and 24" wheels
The arm support provides support for the forearm.
The clothing guard protects against dirt.
The side panels are adapted as needed by qualified personnel. Subsequent adjustments may be made only by
qualified personnel.
Dino 3
Use
31