Explosive Gas Precautions; Precautions When Working With Batteries - Xantrex Truecharge TC20+ Owner's Manual

Important Safety Information
7. Do not disassemble the charger. See
8. To reduce the risk of electrical shock, disconnect both AC and DC
9. The charger must be provided with an equipment-grounding
10. For marine applications in the United States, external connections to

Explosive gas precautions

1. Working in the vicinity of lead-acid batteries is dangerous. Batteries
2. TrueCharge 20+ and TrueCharge 40+ have been approved as
3. To reduce the risk of battery explosion, follow these instructions

Precautions When Working With Batteries

1. Have someone within range of your voice or close enough to come
2. Have plenty of fresh water and soap nearby in case battery acid
x
System Information" for instructions on obtaining service.
Attempting to service the unit yourself may result in a risk of
electrical shock or fire. Internal capacitors remain charged after all
power is disconnected.
power from the charger before attempting any maintenance or
cleaning or working on any circuits connected to the charger.
Turning off controls will not reduce this risk.
conductor connected to the AC input ground.
the charger shall comply with the United States Coast Guard
Electrical Regulations (33CFR183, Sub part 1).
generate explosive gases during normal operation. Therefore you
must read this guide and follow the instructions exactly before
installing or using your charger.
Ignition Protected. They may be installed in areas containing
gasoline tanks and fittings which require Ignition Protected
equipment. Xantrex recommends, nevertheless, that it is safest not
to install electrical equipment in these areas.
and those published by the battery manufacturer and the
manufacturer of the equipment in which the battery is installed.
to your aid when you work near a lead-acid battery.
contacts skin, clothing, or eyes.
Appendix D, "Product and