Setting Battery Types On The Main Unit - Xantrex Freedom HF 1000 Owner's Manual

Setting Battery Types on the Main Unit

3–2
You can attach different types of lead-acid batteries to the
Before installing batteries make sure that you configure the unit to
optimize the charging process.
FIRE HAZARD
Incorrectly setting the battery type can lead to battery damage and
a risk of fire.
Failure to follow these instructions can result in death or serious
injury.
The settings can be changed by adjusting the dip switches found on the
main unit behind the display panel.
Battery Dip Switch Setting
Type Switch 1|Switch 2
Fixed OFF|OFF
Flooded OFF|ON (default)
GEL ON|OFF
AGM ON|ON
To adjust the battery type setting:
By default the battery type is set to Flooded (OFF|ON).
1. Detach the Display Panel to expose the Dip Switches.
2. Use the tip of your fingernail or a small screw driver with a flat tip to
adjust the switches.
OFF
Figure 3-1 Dip Switches (Default Settings Shown)
Bulk/Absorption
13.5
14.4
14.2
14.3
Switch 1 | Switch 2
Freedom
Float
13.5
13.5
13.8
13.4
ON
975-0390-01-01
HF.