Transferring Memory Contents - Icom IC-2100H Instruction Manual

Transferring memory
contents
This function transfers a memory channel's contents to VFO
(or another memory/call channel). This is useful when search-
ing for signals around a memory channel frequency and for
recalling the offset frequency, subaudible tone frequency, etc.
S.MW
Push
DUP T
5 9
1
M
FUNC
Select the memory channel to be programmed.
Select memory mode by pushing [M/CALL] once or
twice ("!" appears).
Rotate the tuning dial to select the memory channel.
Push [S.MW] momentarily, then rotate the tuning dial to se-
lect another memory channel to transfer.
• To transfer to the VFO, push and hold [
pushing momentarily.
Push and hold [ MW] to transfer when a momentary
(S.MW)
push was used in the previous step.
MW
for 1 sec.
DUP T
5 9
1
MW
+
A
CLR
MW] instead of
(S.MW)
MEMORY OPERATION
Ä Set the memory channel to be transferred:
MW
Push [MR] to select memory mode.
Push [Y] or [Z] to select the memory chan-
nel; or push [GENT] then push the desired
memory channel number (3 digits) to select
the memory channel directly.
Å Push [FUNC] then [EMW] momentarily, then
push [Y] or [Z] to select another memory chan-
nel to transfer.
• To transfer to the VFO, push [FUNC] then push and
hold [EMW] instead of pushing momentarily.
Ç Push [FUNC] then [EMW] for 1 sec. to transfer.
6
29