Icom IC-2100H Instruction Manual page 13

KEY FUNCTION
Clears a digit before entry.
Cancels the scan, priority watch or
MW
DTMF memory function.
A
CLR
43)
Enters set mode and advances the set
D-OFF
B
SET mode selection.
Sets the keypad for numeral input
T-OFF
C
ENT
Decreases the set mode selection order
after entering set mode.
No primary function.
MUTE
D
No primary function.
16KEY LOCK
#
No primary function.
TONE-1
M
SECONDARY FUNCTION (after
(p. 17) Writes VFO contents into the memory
or call channel.
(pgs. 16, 37, Advances the memory channel number
when continuously pushed after pro-
gramming is completed.
DTMF memory OFF.
Turns the subaudible tone encoder, pocket
(p. 17) beep or tone squelch OFF.(pgs. 21, 47, 46)
Mutes the audio.
• Mute function is released when any operation
is performed.
Locks the digit keys on the keypad (includ-
ing the A to D, # and M keys.
Sends a 1750 Hz tone signal for 0.5 sec.
PANEL DESCRIPTION
) OTHER FUNCTIONS
FUNC
(p. 29)
(p. 28)
[A] to [D] transmit DTMF
memories.
(p. 18)
After :
(p. 14) DTMF-S
Transmit the appropriate
DTMF code.
(p. 22)
1
(p. 44)
(p. 45)
9