Memory Operation; General Description; Memory Channel Selection - Icom IC-2100H Instruction Manual

6

MEMORY OPERATION

General description

The transceiver has 107 memory channels including 6 scan
edge memory channels (3 pairs), and 1 call channel. In addi-
tion, 6 scratch pad memories are available (see p. 34). Each
of these channels can be individually programmed with the
following data.
• Operating frequency (pgs. 13)
• Duplex direction and offset (pgs. 21, 24)
• Subaudible tone encoder or tone squelch and its tone fre-
quency (pgs. 21, 47)
• Skip information* (p. 40\)
*Except for scan edge memory channels.
26

Memory channel selection

D Using the tuning dial
Push [M/CALL] once or twice to display "!".
Rotate the tuning dial to select the desired memory chan-
nel.
• Only programmed memory channels can be selected.
D Using the [Y]/[Z] keys
Ä Push [MR] to select memory mode.
MR
Å Push [Y] or [Z] to select and set the desired
memory channel.
• Pushing [Y] or [Z] for more than 0.5 sec. activates a
YZ scan.
• If a scan is activated, push [Y] or [Z] again to stop it.
D Using the keypad
Ä Push [MR] to select memory mode.
Å Push [GENT] to activate the keypad for numeral
MR
input.
Ç Push 3 appropriate digit keys to input a channel
ENT number.
C
• When inputting non-programmed channel numbers,
the previous memory channel appears.
• To select scan edge channels, "M" and "#" can be
used for A and b respectively.