Otto Bock 757B35-0 Instructions For Use Manual page 15

3.2 Area of Application
The 757B35=0 MyoEnergy Integral can be used for upper arm and forearm prosthetic compon­
ents.
3.3 Conditions of Use
Using the 757B35=0 MyoEnergy Integral with the 4in1 Controller is prohibited.
3.4 Required Qualifications
The fitting of a patient with the 757B35=0 MyoEnergy Integral must be carried out exclusively by
prosthetists.
► INFORMATION: The 757B35=0 MyoEnergy Integral will be referred to as the MyoEn­
ergy Integral in the remainder of this text.
4 Safety
4.1 Explanation of Warning Symbols
Warning regarding possible serious risks of accident or injury.
WARNING
Warning regarding possible risks of accident or injury.
CAUTION
Warnings regarding possible technical damage.
NOTICE
5 Safety Instructions
5.1 Product-Specific Safety Instructions
CAUTION
Non-observance of safety instructions
Injury due to faulty control or malfunction of the prosthetic system.
►
► Destruction of the product.
→ Follow the safety instructions and the precautions specified in this accompanying document.
CAUTION
Disconnecting or establishing electrical connections when switched on
► Injury due to faulty control or malfunction of the prosthetic system.
→ Before replacing prosthetic components (e.g. gripping components), be sure to switch off
the product as specified in the instructions for use.
CAUTION
Penetration of liquids
► Injury due to faulty control or malfunction of the prosthetic system.
→ Ensure that no liquid penetrates into the battery.
→ Do not use the battery for bathing prostheses.
CAUTION
Improper use of the product
► Injury due to faulty control or malfunction of the prosthetic system.
→ Instruct the patient in the proper handling of the product according to the section "Patient-
Specific Safety Instructions".
Ottobock | 15