Otto Bock 757B35-0 Instructions For Use Manual page 14

1 Foreword
INFORMATION
Last update: 2014-01-14
► Please read this document carefully.
► Follow the safety instructions and the precautions specified in this accompanying document.
If assistance is required during the start-up, use or maintenance of the product, as well as in
►
the event of unexpected operating behaviour or circumstances, contact the manufacturer
(see manufacturer's address on the back of this accompanying document).
2 Product Description
2.1 Function
The 757B35=0 MyoEnergy Integral is a complex power supply system. It consists of a battery,
charging receptacle, 2-pole supply cable, 3-pole communication cable and electronics. The com­
ponents are inseparable and ready for mounting. Use the 757L35 MyoCharge Integral to charge
the battery.
2.2 Components
2.2.1 Rechargeable Battery
The battery (Fig. 1, item 1) consists of two cells.
2.2.2 Charging Receptacle
The charging receptacle (Fig. 1, item 2) with integrated button, LED, and beeper has several
functions.
• Contacts for battery charging
• LED for displaying the current battery charge level
• Button for turning the prosthesis on and off and for activating the battery charge level display
• Beeper for providing feedback on operating states
2.2.3 Supply Cable
The 2-pole supply cable (Fig. 1, item 3) with receptacle establishes the connection between the
battery and the respective prosthesis component. The 757VAK1 Battery Adapter Cable for VASI
System is required for operation with VASI components. This adapter cable is not included in the
scope of delivery and can be ordered from Ottobock.
2.2.4 Communication Cable
The 3-pole communication cable (Fig. 1, item 4) with receptacle is used for the exchange of data.
For functionality, please refer to the instructions for use of the respective prosthetic components.
2.2.5 Electronics
The integrated electronics (Fig. 1, item 5) protect the battery against short circuits, overvoltage,
undervoltage and charging outside the allowable temperature range. They also communicate with
the battery charger or the MyoLino Link.
3 Application
3.1 Intended Use
The 757B35=0 MyoEnergy Integral is to be used exclusively as a power supply for the MyoBock
prosthetic system and VASI prosthetic components. The 757B35=0 MyoEnergy Integral is to be
used for unilateral or bilateral exoprosthetic fittings of the upper limbs.
14 | Ottobock