Accessories; Charging The Battery; Connecting The Power Supply And Battery Charger - Otto Bock Genium X3 Series Instructions For Use Manual

• 1 pc. 4E60* inductive charger
• 1 pc. cosmetic case for battery charger and
power supply
• 1 pc. 646C107 Bluetooth PIN card
• 1 pc. 647F542 prosthesis passport
Only when "DUAL" marking is present (see Page 60)
• iOS app
http://www.ottobock.com/cockpitapp

7.2 Accessories

The following components are not included in the scope of delivery and may be ordered separ­
ately:
• Genium X3 Protective Cover: 4X900
• Genium X3 Protective Cover: 4X193-1
Only when "DUAL" marking is not present (see Page 60)
• 4X350-X3 remote control
The user interface is available in the following languages: German, English, French, Italian,
Spanish, Dutch, Swedish
• 4X194 wrist band for 4X350-X3 remote control

8 Charging the battery

The following points must be observed when charging the battery:
• With average use, the capacity of the fully charged battery is sufficient for about 5 days.
• We recommend charging the product every day when used on a daily basis.
• When used daily, the complete charging unit (power supply – battery charger) may remain
plugged into the wall socket.
• The battery should be charged for at least 3 hours prior to initial use.
• Use the 757L16* power supply and 4E60* battery charger to charge the battery.
• Note the permissible temperature range for charging the battery (see Page 96).
• The distance between the battery charger and the receiver on the product must not exceed
2 mm.

8.1 Connecting the power supply and battery charger

1
1) Slide the country-specific plug adapter onto the power supply until it locks into place (see
fig. 1).
"4X441-IOS=V*
2
• 1 pc. card holder for prosthesis passport
• 1 pc. 647G1386, 647G1386 instructions
for use (user)
• Android app "Cockpit 4X441-Andr=V*" for
download
http://www.ottobock.com/cockpitapp
Cockpit" for
from
download from
3
the website:
the website:
73