Table of Contents
Advertisement
Appendices
Feature
Maximum obstacle height that can be
overcome
Ground clearance
Maximum inclination angle on which the
wheelchair will remain stable
13.2 Required tools
The following tools are required for adjustments and maintenance work:
•
Allen keys in sizes 2 – 8 mm
•
Ring and open-ended spanners in sizes 8 – 24
•
Socket wrenches in sizes 8 – 20 mm
•
Phillips head screwdriver (size: 2)
•
Torque wrench (measurement range 5-50 Nm)
13.3 Torque values of the screw connections
Unless otherwise specified, screw connections are tightened with the following torque values:
•
Thread diameter M4: 3 Nm
•
Thread diameter M5: 5 Nm
•
Thread diameter M6: 10 Nm
•
Thread diameter M8: 25 Nm
13.4 Sound emission information
INFORMATION
► The products in the series were tested for compliance with maximum sound emission requirements according
to the ISO 7176-14 standard.
► They fully meet the requirements according to the areas of application identified below.
Area of application
In enclosed rooms
Outside of enclosed rooms
1)
Depending on the area of application according to ISO 7176-14
74
Threshold value (according to regulation (EU) No. 1300/2014)
60 mm (2.4"); at an upward slope angle of 10°, ground clearance
must measure at least 60 mm (2.4") under the foot rest for going for
ward at the end of the slope
6° (dynamic stability in all directions)
9° (static stability in all directions, also when wheel lock engaged)
Maximum sound pressure level
65 db(A)
75 db(A)
1)
Skippi Plus
Advertisement
Table of Contents
