Table of Contents
Advertisement
Feature
1)
Length [mm]
2)
Width [mm]
1)
Smallest wheels ["]
2)
Height [mm]
1)
Turning radius [mm]
1)
Maximum weight [kg]
Maximum obstacle height that can be overcome [mm]
Ground clearance [mm]
Maximum inclination angle on which the wheelchair will
1)
remain stable [°]
1)
Threshold value is always maintained with this type of wheelchair, see Page 39
2)
Threshold value can be exceeded with some wheelchair versions; please measure or ask the qualified personnel
13.2 Required tools
The following tools are required for adjustments and maintenance work:
•
Allen wrenches in sizes 3, 4, 5, 6
•
Ring and open-ended wrenches in sizes 10, 11, 13, 19 and 24
•
Socket wrench size 19 mm
•
Phillips head screwdriver (size: 2)
•
Screwdriver (blade width: 2.5 mm)
•
Torque wrench (measurement range 5-50 Nm)
13.3 Torque values of the screw connections
Unless otherwise specified, screw connections are tightened with the following torque values:
•
Thread diameter M4: 3 Nm
•
Thread diameter M5: 5 Nm
•
Thread diameter M6: 10 Nm
•
Thread diameter M8: 25 Nm
Start B2
2)
Threshold value (according to Directive (EU)
No. 1300/2014)
1200 (plus 50 mm for the feet)
700 (plus 50 mm on each side for the hands when mov
ing)
approx. 3 or greater (according to the directive, the
smallest wheel must be able to overcome a gap measur
ing 75 mm horizontally and 50 mm vertically)
max. 1375 mm (54.1"); including a 1.84 m (72.5") large
male wheelchair user (95th percentile)
1500
200 (for wheelchair and user, including any baggage)
1)
50
60 (at an upward slope angle of 10°, ground clearance
must measure at least 60 mm under the footrest for
going forward at the end of the slope)
6 (dynamic stability in all directions)
9 (static stability in all directions, also when wheel lock
engaged)
Appendices
41
Advertisement
Table of Contents
